|
|
Post by Jet Jaxson on Mar 12, 2005 6:16:45 GMT -5
Drum brake's front & back,, convert to disk front & back,,,, Need to know what master cylinder to use !!!!!! I put a heidt's front conversion kit on my 63 nova recently & added rear disk's to my rear that has narrow 12 bolt chevy.......If i had disk on front & drum on back was told that a master cylinder from 67 nova would work.........Any help would be appreciated........Thank's much..................................[ ![]()  |
|
|
|
Post by hsutton on Mar 12, 2005 11:51:49 GMT -5
I believe they put a Corvette master cylinder on my son's Chevelle. They also need a residual pressure valve for the rear. The residual valve should be a 10 pound one if the drums are left on the rear according to the Wilwood book, which says this valve compensates for the drum brakes return spring pressure. A two pound one is used in the rear if discs are used at all four corners.
|
|
|
|
Post by jet jackson on Mar 13, 2005 12:22:30 GMT -5
Going to have disk all around no drums at all.....Looked at 64 nova couple months back was at car show that had disk all around saw master cylinder but coudn't fiqure it out what it was......  .....No one around here has no idea they can with a disk,,,brake setup though....Been looking everywhere to find out....... ![]()  |
|
|
|
Post by 63chevytoo on Mar 13, 2005 22:48:50 GMT -5
Hey Jet,
Go to stevesnovasite.com and register. Then ask the question and I know someone there will help.
Nice car.....
Don
|
|
|
|
Post by To Don on Mar 14, 2005 7:00:24 GMT -5
Ok,,,Thank's Don.......All this computer stuff all new to me.......
|
|
.....No one around here has no idea they can with a disk,,,brake setup though....Been looking everywhere to find out.......