|
|
Post by Mike Stark on Feb 25, 2005 11:30:18 GMT -5
Here's the first pic with Rick Robinson of Motorsports Engineering behind the wheel. It's my 80 Malibu thats gonna run a 400" turbocharged deal.  |
|
TD2593
New Member
Fastest Olds Powered Vehicle
Posts: 5
|
Post by TD2593 on Feb 25, 2005 19:09:14 GMT -5
Mike you might want to put some floor pans and doors on that car its going to get really drafty ;D. What are you planning on using for power ? What turbos ? Engine Management ? Im just full of questions.  |
|
|
|
Post by Mike Stark on Feb 26, 2005 11:57:36 GMT -5
Small Chevy with a 4.125" x 3.75" stroke, Dart block, Callies crank, Howards billet rods, SB2.2 heads flowing 400, fat roller stick from Cam Motion. I'll be using a 106mm turbo and I'll be doing a blow thru carb deal. Carb is coming from CSU. Should make 1800+. The car will weigh between 3150 and 3400 depending on what class I'm running. With a powerglide and 9" rear. Should go mid to high 7's on 10" slicks or Drag Radials.
|
|
|
|
Post by Jason G on Feb 28, 2005 22:29:31 GMT -5
Mike,
The new car is lookin' good. Sounds like it will be a real strong combo. Keep us posted on how it is progressing.
Jason G.
|
|
|
|
Post by DB on Mar 1, 2005 5:41:29 GMT -5
First of all, you have to ignore Russell. He just acts like he knows what he's doin What's up Russell, Dusty here, I need to call you sometime!! This question is for Mike concerning those Howard's Billet Rods. I have considered them for my turbo SBC but can't find anyone with experience using them. I have spoke with Howard's several times and they seem great for the $$ but I wonder how they compare to an Oliver or other well known great quality rod. I plan to make as close to 1500 as I can and want to make sure I have a good rod. Any experience or advice on the rods you'd like to share? |
|
|
|
Post by Mike Stark on Mar 2, 2005 12:53:18 GMT -5
The rods work great. They are lighter than the Olivers and very right for the money. I'm using them in my turbo deal (have been using them in my nitrous motors) Also putting them in Scott Kern's 505 turbo big block. They will handle a ton of power. I like the Olivers too, but the Howards have served me well.
|
|
|
|
Post by Mike Peters on May 11, 2005 14:15:44 GMT -5
You know the pic I want to see or am I going to have to bribe Rick to crawl under there, snap a few, and send them my way?!!! LOL!!!
|
|
|
|
Post by mike on May 22, 2005 10:35:36 GMT -5
CSU CARBS!!!!!!! I have known Kevin & Dennis for 15 years, Your in good hands with there stuff.. Very small Carb Business that puts out some of the best & Fastest carb anywhere.. They really do know about Carbs and if they dont know something they wont make it up to give you a answer.. Something I think too many people do in this business.
|
|
|
|
Post by Mike Stark on May 23, 2005 19:45:03 GMT -5
Yeah, the guys are great to deal with. Already bought one carb for Scott Kerns 505" big block turbo deal. Mine is coming soon.
|
|
