Post by 85Iroc on Jan 3, 2005 12:05:16 GMT -5
All of the following are being sold only because I'm going turbo small block so the big block stuff has to go!!
CSI elec. water pump, brand new in box. Never even bolted up.....$200 It's blue anodized.
set of 8 JE 13:1 dome pistons, 4.32 bore (.070 over) need 6.385 rod, dyno time only, 2 are brand new.....$300
Cam Motion solid roller, super condition, 271/277 duration @ .050, .712/.714 lift on 110 lsa. $200
Dart Intake, rect. port, tapped for fogger....$250
Hooker super comp headers, 82-92 camaro, 1-7/8, 3" collectors, with evac tubes, some dings.....$150
Nitrous Express shark fogger kit, complete w/ 2 15lb bottles, purge solenoid, msd rpm window switch, pre-formed hard lines for sbc and extra set of un-bent hard lines.......$850
Product Engineering regulator by-pass system with all fittings, 1 4-port regulator for carb (or carbs), 1 2-port reg. for nitrous, High pressure bypass on y-block w/low pressure bypasses on regulators, cost over $600 new..........$450, only 6 passes on 1/8th mile. (possibly sell PE 460 gph pump also, supports 2000+ hp) see
productengr.com
bshrum@ragansmith.com
615 244-8591
CSI elec. water pump, brand new in box. Never even bolted up.....$200 It's blue anodized.
set of 8 JE 13:1 dome pistons, 4.32 bore (.070 over) need 6.385 rod, dyno time only, 2 are brand new.....$300
Cam Motion solid roller, super condition, 271/277 duration @ .050, .712/.714 lift on 110 lsa. $200
Dart Intake, rect. port, tapped for fogger....$250
Hooker super comp headers, 82-92 camaro, 1-7/8, 3" collectors, with evac tubes, some dings.....$150
Nitrous Express shark fogger kit, complete w/ 2 15lb bottles, purge solenoid, msd rpm window switch, pre-formed hard lines for sbc and extra set of un-bent hard lines.......$850
Product Engineering regulator by-pass system with all fittings, 1 4-port regulator for carb (or carbs), 1 2-port reg. for nitrous, High pressure bypass on y-block w/low pressure bypasses on regulators, cost over $600 new..........$450, only 6 passes on 1/8th mile. (possibly sell PE 460 gph pump also, supports 2000+ hp) see
productengr.com
bshrum@ragansmith.com
615 244-8591