|
|
Post by strokedTA on Dec 7, 2004 10:02:48 GMT -5
Off of my 6 sec. 1/8 mile 3400# car.
All for $3500.00
Will guarantee quality. Brodix, heads, intake,Comp cam and lifters (endura X), Manton pushrods, T&D rockers.
Have $2500 in just the heads.
Motor made 650 horse with just 11:1, cam is under .700 lift and is 260-270 dur. @.050.
Intake is Brodix 1002, Dominator top, might through in the 1175 Pro System carb too,for a little extra?
Dave
Wheels Up Racing
217-343-2209
|
|
|
|
Post by Jason G on Jan 11, 2005 23:59:41 GMT -5
Dave,
What part number/ratio are the T&D shaft rockers? Would you be willing to sell those separate? How much?
Thanks,
Jason
jgchevelle@aol.com
|
|
|
|
Post by strokedTA on Jan 12, 2005 9:06:33 GMT -5
The rockers are a special offset for these heads, so I can't sell one without the other wouldn't do me any good.  Rockers are 1.65 ratio though. |
|
|
|
Post by john newman on Jan 13, 2005 6:57:23 GMT -5
are you still selling the carb.(dominator) how much.
|
|
|
|
Post by strokedTA on Jan 13, 2005 7:55:40 GMT -5
Have 1100.00 in carb, will sell for $500, just got new boosters, needles/seats, gaskets, also.
|
|
|
|
Post by john newman on Jan 13, 2005 19:20:06 GMT -5
what carb is it, whats all done to it, mite be interested, need a good carb. for my combo. thanks.
|
|
|
|
Post by strokedTA on Jan 13, 2005 22:31:33 GMT -5
It's prosystem carb, was build for my motor, but if yours is close will work fine, with maybe a little tuning. It's an 8896, now with annular booster and set-up for nitrous. Prosystem is the best carb place out, in my opinion, and a lot of others, so...... Let me know what you think. www.pro-system.comDave |
|
|
|
Post by john newman on Jan 14, 2005 9:10:24 GMT -5
i called Pro Systems with the carb.# and it's a totally different carb. for a all motor class that i run, i have a 440" sbc. running in the new NMCA - Pro Stock class sorry, the carb. should sell fast, it's cheap enough. thanks.
|
|
|
|
Post by strokedTA on Jan 14, 2005 9:25:55 GMT -5
This is all best offer guys! Let me know what you think!
Will trade for strong Glide also!
Dave
|
|
|
|
Post by Dave on Feb 2, 2005 16:24:43 GMT -5
Now adding the fuel system. It's all Product Engineering, 500gph pump/filter combo. If interested let me know! Need to sell this stuff, doesn't do any good sitting on the workbench. LOL |
|
