Post by sschevellefan on Jul 8, 2006 2:10:14 GMT -5
The block is a 817 casting 2 bolt block. It`s already .030 and will need to go .040 over and will need a line hone. It was a circle track motor and spun a main after 30-40 laps after a fresh build. It has some mild surface rust in some of the cylinders but it rubs out with a little WD40. It`s also missing the main bolts.
The crankshaft is a new in the box Scat 9000 cast steel 377" stroker crank. It has a 3.5" stroke and 400 mains. It`s set up for 6" rods or longer but will work with 5.7" rods by triming down the counterweights.
I`m asking $200 for the block and crankshaft. PICK UP ONLY IN NAPA CA.
The cam is a Isky solid roller. It`s a small bace circle cam. The specs are 290/294 256/260@.050 .640/.640 on a 106 LSA. power band is 3800-7200rpms. It`s used but in good shape. There is some wear where the lifters were rolling on it but it`s in usuable shape. I`m asking $115 shipped to lower 48 states. I need to sel these asap, might make a package deal.
The crankshaft is a new in the box Scat 9000 cast steel 377" stroker crank. It has a 3.5" stroke and 400 mains. It`s set up for 6" rods or longer but will work with 5.7" rods by triming down the counterweights.
I`m asking $200 for the block and crankshaft. PICK UP ONLY IN NAPA CA.
The cam is a Isky solid roller. It`s a small bace circle cam. The specs are 290/294 256/260@.050 .640/.640 on a 106 LSA. power band is 3800-7200rpms. It`s used but in good shape. There is some wear where the lifters were rolling on it but it`s in usuable shape. I`m asking $115 shipped to lower 48 states. I need to sel these asap, might make a package deal.