|
|
Post by pete on Mar 15, 2006 9:14:39 GMT -5
i have aprox 10 k for killer sbc.looking to go in the 8.60 range on moto..cars 3150 lbs mustang looking to do something now!!!!..e-mail me @ snkypete406@yahoo.com..can be 18 */15*-sb2 just need to go fast on motor!!thanks guys
|
|
|
|
Post by Ron Miller on Mar 22, 2006 9:52:00 GMT -5
New 496 BB Chevy, Eagle 4340 4.25 crank std/std, Eagle 6.385 rods, Clevite 77 Race Bearings, piston & rods pin fitted, ATI Balancer & Flywheel, Assembly Raced Balance, Jesel belt drive, Tavia timing pointer, Comp Cams Roller Cam & lifters .904 lifters, CB322A-R10 @.050 284/294 in lift .720 ex .714 on a 110 Ls, BHJ true bored Bronze lifters for .904 dai. lifter, 1974 GM block, a # 289 casting 4-bolt main alined honed with ARP main studs, Stroker Clearanced on a Bridgeport, block baked/blasted magged pressure tested, fully deburred and detailed block has been painted with Gyptal inside, valley screens, bores have in/ex valve reliefs, true decked/bored/honed with BHJ fixtures, Wiseco 14.1 .060 Pro Series pistons hand blended domes, Speed Pro rings, Dart Pro 1's 325's CNC Pro Mod ported by Tony Mammo(Flow-wizard)when he worked @ Shariroff's, 2.300 in/1.88 ex 11/32 SVD valves,tit ret, Manley .800 lift nex-tek upgrade on the springs,milled to 114 cc,s, ports fully cleaned up, have flow sheets, ARP 12 Pt's head studs, Jomar Pro Model stud girdle, Crane roller rockers, Comp Cams 3/8 .080 hd push rods, B & B oil pan w/built in screen/scraper and std volume oil pump, Edelbrock #2907 Victor-R 4500 series fully ported radius's/blended,GM oil splash shield, Fel-Pro Race gaskets used thru out, one piece rubber oil pan gasket-reusable, ARP fasteners used thru out, 1 set of Champion Race plugs, everything you see in the picture and whats was not in the picture is the GM splash shield and Fel-Pro ex gaskets. This motor can also be run on Alcohol, No carb,water pump or distributor. I have a engine cradle that will go with motor to transport safely. Cost over $13000.00 to build. Sell for $10000.00. I will crate and deliver to a shipper near me for free if its a out of State buyer. I have a shipping broker that will beat any deal out their. So don't let shipping scare you from buying this Great Engine. I can also delivey and will drive up too 4 hours for a fee.
Thanks for looking and the ad space
Ron Miller
Brownstown,Mi 48134
734-782-9333 before 9:00 pm
|
|
