|
|
Post by pete on May 29, 2005 9:32:59 GMT -5
Are you able to reuse a head gasket once it has been torqued down? (The engine has never been run) I had to take the engine down after assembly due to unforseen clearance issue. Felpro race gasket.
thanks
|
|
|
|
Post by Wolfplace on May 31, 2005 0:25:29 GMT -5
Are you able to reuse a head gasket once it has been torqued down? (The engine has never been run) I had to take the engine down after assembly due to unforseen clearance issue. Felpro race gasket. thanks = Never had a problem doing it, even on the dyno after running but I wouldn't send an engine out after resuing them,, feel real stupid if it caused a problem  |
|
|
|
Post by Mike Stark on May 31, 2005 6:06:01 GMT -5
I agree. Use it again. It's alread pre-compressed and should be fine. I've used them again even after running in a pinch with no problems.
|
|
