Naturally aspriated SBC combination, advice wanted

[David]

OK guys lets let it rip.
I have a Bow-Tie block with a fresh 4.185 bore.
3.875 stroke crank
6.00 rods
AFR 220 heads (neading some porting, that will get takin care of).
Jesel belt drive
Dart/Wilson intake 4500 flange with Carb shop 1050
Davis step headers 1 7/8, 2, 2 1/8 with merge collectors

Could I please get some thoughts on the compression, camshaft, or anything else. I would like to make atleast 700 HP.
BTW I live in Oregon, I wont be racing with you. The PSCA races out of Vegas and would like to go down there and mix it up with those boys. E-mail me direct if you would like. [e-mail]

Thank you

[Mike Stark]

Work the heads. Try for around 310 to 320 cfm. Go with a decent roller just over .700 lift. Make it at least 14:1. Should make 700 real easy.