|
|
Post by jrs1984 on Jun 22, 2007 18:41:23 GMT -5
Mike, since i'm building a new combo, i'm looking at the Brodix- (WP-12 x 12,SP,RP -299 ) #1128103 w/ 1801 manifold, which i can use in the NMCA's Pro-Stock Class, if it were put together correctly, as a N/A 440" sbc, 16.2.1 comp., big roller, do you think it would make close to or over 875 hp. Thanks. John Newman.
|
|
|
|
Post by Mike Stark on Jun 26, 2007 7:31:46 GMT -5
It should have that potential. Prostock is a very competitive class, but you are on the right track to getting where you need to be. I'd look at the normal go fast stuff... Honda rod journals, 2 ring pistons, light oil rings with vacuum pump, etc.
|
|
|
|
Post by jrs1984 on Jun 27, 2007 14:00:10 GMT -5
Thanks Mike, i'm planning on doing just as you said " go fast stuff ", and i'm not going to cut any corners on this one. John Newman.
|
|
|
|
Post by jrs1984 on Jun 27, 2007 14:02:24 GMT -5
Thanks Mike, i'm planning on doing just as you said " go fast stuff ", and i'm not going to cut any corners on this one. It's always good to get the right answers from you, and not from other people who think they know alot. Thanks again. John Newman.
|
|
