Post by Gilley on Mar 2, 2007 21:07:31 GMT -5
Hi, I'm hoping to get some recomendations on some heads for my sbc. The motor is a 350 .60 over with roughly 10.5 compression with forged TRW's. Cam is a Lunati hyrdaulic flat tappet with 290 int./297 exh. Advertised duration and 235 int./240 exh @0.050 and 0.490 int./0.490 exh. lift as well as 112 LSA. I'm trying to reach the maximum potential with this motor and am wondering what heads would be my best bet. Maybe with a stage 3 port job too. Thanks much.
