|
|
Post by LUCAS on Feb 12, 2007 16:46:50 GMT -5
what flow numbers have you seen with 049 heads I 219 E 188 BOWL BLEND POLISHED EXHAUST AN INTAKE WITH RADIUS WORK HAVE YOU EVER SEEN AN OVAL PORT HEADED BLENDED TO A SGAURE PORT INTAKE WOULD THAT HURT OR HELP  |
|
|
|
Post by Mike Stark on Feb 12, 2007 17:16:12 GMT -5
They usually flow 300 cfm IN and 220 CFM EX. There is no need to make the port square. It will not help at all.
|
|
|
|
Post by lucas on Feb 12, 2007 17:50:59 GMT -5
what else can be done to these heads to make good power |
|
|
|
Post by Mike Stark on Feb 13, 2007 8:41:20 GMT -5
A full port will put the heads into the 340 cfm range. You are going to start to tie up a lot of $ in them though. I would rather see you get into an aftermarket set then. You would be money ahead going that direction.
|
|
|
|
Post by lucas on Feb 13, 2007 9:03:49 GMT -5
thanks i got these heads with all the work done basicly free just no flow sheet just wondering if i could do any more thanks for your time lucas |
|
