|
|
Post by gary on Feb 10, 2007 20:49:42 GMT -5
mike,what head would you recomend for a 355 sbc with 10.1 comp.looking at a hydraulic lunati voodo cam with .504 on in. and .525 on exh. and 233 on the in and 241 on the exh @.050. want to spin it to about 6500. max,car is auto with 4.11 gears at 3600lbs,its a pump gas street car.just trying to throw together a quick little combo.not sure what intake maybe rpm air gap and a 750 with vacuum secondaries.headers are 1-5/8 primaries. thanks
|
|
|
|
Post by gary on Feb 11, 2007 9:54:52 GMT -5
i have decided to bring the cam down a notch,the new cam specs
are .498 in-.504 ex, duration @ .050 227 in-233 ex. thanks
|
|
|
|
Post by Mike Stark on Feb 12, 2007 8:40:35 GMT -5
I sell an aluminum head in 2 versions. The 200cc version would work really well and is very affordable. I would recommend porting the chambers, but other than that bolt them on. You're looking at $1100 total. The heads come with bowl porting already.
|
|
|
|
Post by gary on Feb 12, 2007 19:35:33 GMT -5
is that something you would have in stock? is there a phone number to reach you during the day. thanks
|
|
|
|
Post by Mike Stark on Feb 13, 2007 8:42:42 GMT -5
I have castings, but I custom build each set when ordered. You can reach me at (317) 241-3432. I can get a set together in about a week.
|
|
