Post by MikeB on Nov 2, 2006 21:48:51 GMT -5
Mike -- I am building a 327 for a 3500 lb car with wide-ratio Muncie trans. Axle ratio is 3.42. I already have the block and balanced assembly. Compression ratio will be 9.4 w/ 64cc chambers. Looking at a small solid lifter cam like Comp XS256S (218/224, 110, .465"/.477"). Also looking at using an existing Performer RPM manifold and 600 CFM carb, but not locked in to either.
Being realistic about how I use the car, I need to make good TQ in the 1500-4500 RPM range, but would like to rev to 5500+ from time to time. What heads and porting services would you recommend? And if you have any other comments, I'd like to hear them.
Being realistic about how I use the car, I need to make good TQ in the 1500-4500 RPM range, but would like to rev to 5500+ from time to time. What heads and porting services would you recommend? And if you have any other comments, I'd like to hear them.
