|
|
Post by Eddie on Nov 14, 2005 18:11:28 GMT -5
Car runs 10.20s @ 130 on motor. 509ci, steel factory 502 heads, 12-1, roller cam, 1150 Dominator. 3600 pounds with Turbo 400, 4200 stall, 4.30 gears. What will it go with a small shot? 150-200hp.
|
|
|
|
Post by Mike Stark on Nov 15, 2005 19:19:38 GMT -5
Probably 9.50's if it hooks.
|
|
|
|
Post by hsutton on Dec 5, 2005 4:16:10 GMT -5
What size tire are you running? If you go more than a 150 shot you'll probably run out of RPM. It might require pulling some gear out of the car to get all the way down the quarter. You may drive through your converter also.
|
|
|
|
Post by 67RS502 on Dec 5, 2005 11:54:04 GMT -5
What Harold said...
What rpm are you shifting at? and going thu at the line now? Less gear!
|
|
|
|
Post by Eddie on Dec 7, 2005 14:48:14 GMT -5
Shift @ 6800. Cross the line at 7000. Run a 29.5" tire.
|
|
|
|
Post by Mike Stark on Dec 9, 2005 9:43:48 GMT -5
It's going to try to cross the line about 800 rpm higher on the sauce. Be ready for it to rev much more quickly.
|
|
