|
|
Post by john newman on Apr 7, 2006 23:23:30 GMT -5
I spoke to you about porting a 1209 manifold, the heads are the Brodix -12's, but all the manifolds we got in to match up, the ports are way off, we bolted heads to motor, sat the manifold on the heads and the center of the intake ports will not line up with a 1209 intake gasket, the 1209 gaskets line up perfect with the head but not the manifold, do you have any suggestions or a manifold to use with a tall deck block (.300),this is the only thing holding me up. Thanks.
|
|
|
|
Post by Mike Stark on Apr 11, 2006 20:31:13 GMT -5
Is it too high or low? or are the ports just off all over from the casting? If the holes are way off from the heads it might take some welding to fix it up. If you can mark it really well and send it in I can probably work it out for you.
|
|
|
|
Post by john newman on Apr 11, 2006 23:38:46 GMT -5
it's off from front to back, the center of the ports between the intake runners do not match the 1209 gasket, which the gaskets match the heads perfect, and the bolt holes for manifold are perfect, if i would send it to you how long would it take., I already got a price from you before. Thanks Mike.
|
|
|
|
Post by Mike Stark on Apr 23, 2006 17:55:07 GMT -5
If I gotta weld it it could take a while. Maybe 3 or 4 weeks right now. Been too busy to even scratch my ass  |
|
