|
|
Post by jdollar on Jun 15, 2005 13:59:30 GMT -5
How much horse power would these heads be worth on a 427 sbc ? compression is 14:5:1, Dart Intake(fully ported) 1100 cfm 4500 carb, roller cam with .722" lift. Also I be will using a fogger with this engine and was wondering what the limit is on how nitrous could be used with it ? Is there relationship between the engine H.P. and the amount of Nitrous? Thanks in advance for any advice or opinions. J.Dollar  |
|
|
|
Post by Mike Stark on Jun 15, 2005 18:58:33 GMT -5
The engine should make around 700. You can spray it till it wont take anymore. Mostly depends on the nitrous system, camshaft, and exhaust. Should make for a nice engine though.
|
|
|
|
Post by Jdollar on Jun 15, 2005 19:31:00 GMT -5
Thanks Mike for the reply. I will using a Pro Shot fogger I guess I will start at a 250 shot and work from there. My car weighs 3300lbs, what would be a reasonable obtainable E.T. ? That is providing everything else is working properly.
B.T.W. this board is great
J.Dollar
|
|
|
|
Post by Mike Stark on Jun 16, 2005 19:41:29 GMT -5
Mid to low nines should be easy. It will take a little work and a good setup to hit the 8's  |
|
