jason
New Member
Posts: 0
|
Post by jason on Jun 14, 2005 20:11:20 GMT -5
good bad both? give me your thoughts.
|
|
|
|
Post by Mike Stark on Jun 14, 2005 22:04:30 GMT -5
They work pretty well. The flow is good and the valve train is easy to work with.
|
|
jason
New Member
Posts: 0
|
Post by jason on Jun 15, 2005 15:01:06 GMT -5
have you ever flowed a set? did they do what they say? i have heard the pushrod pinch is a weak point?
|
|
|
|
Post by Mike Stark on Jun 15, 2005 18:56:49 GMT -5
Yeah, I've flowed a few sets. The advertised mid lift numbers tend to be a little inflated, but the over all curve is good. The pushrod pinch is the weak point, but the heads will go 340 or better with some good porting.
|
|
jason
New Member
Posts: 0
|
Post by jason on Jun 17, 2005 8:52:09 GMT -5
how much horsepower do you think the 18's M2 ported would make over a set of m2 227's? honest hp?
|
|
|
|
Post by Mike Stark on Jun 18, 2005 12:44:58 GMT -5
Just a guess that they would be worth another 35 to 40 on a 400" + engine.
|
|
jason
New Member
Posts: 0
|
Post by jason on Jun 29, 2005 16:12:22 GMT -5
mike can you send me some data on these heads after you did the porting? cc's,flow#'s?
|
|
|
|
Post by prostock on Jun 29, 2005 22:33:05 GMT -5
Any body used CRANE pedestal mount extruded aluminum rocker orms on this kind of heads with .250 offset on intake how good day are any info Thanks .Any rockers with intake offset for sale out thare lat me no BRODIX 18 X23*.
|
|
