|
|
Post by mikes78 on Apr 10, 2005 19:37:56 GMT -5
Hi, how well can a set of 462 be made to work? What kind of flow numbers? $ is kinda tight and the 462's are all I have at the moment. thanks!
|
|
|
|
Post by Mike Stark on Apr 17, 2005 11:18:35 GMT -5
Bowl work and decent valves will make them flow about 220 cfm. A full port can get them to about 275 max. I wouldn't spend a lot of money on them. You can get a set of aftermarkets pretty cheap these days.
|
|
|
|
Post by Bill on Jun 15, 2005 19:46:40 GMT -5
On a 355 inch motor maybe. Anything larger they will choke it to death!
Bill
|
|
