|
|
Post by prostock on Feb 27, 2005 17:08:21 GMT -5
Any body awer tri to bolt 18*dag 053 GM BOWE TIE manifold on 23*heads raised runner can it be made to bolt on.
|
|
|
|
Post by fredo11 on Feb 27, 2005 18:36:32 GMT -5
The "053" intake was designed for an entrance(measured from the port floor to the deck) of 1.220". And of minor concern is the fact that the standard flange angle is 40* for the 053 and 23* heads have a 35*angle. Hope this helps.
|
|
