|
|
Post by prostock on Feb 14, 2005 21:28:05 GMT -5
Has any body used or info on raised port PRO TOPLINE heads #123-62-256S .Any body used SHAVERS ENGINES in CALIFORNIA fore porting heads howe good is he.
|
|
|
|
Post by john newman on Feb 15, 2005 7:34:33 GMT -5
i run the iron version, good head for what they are, depends on what your doing with them,as far as info. on them Ron Shaver knows quite abit about them,call him,do you have those heads,or looking for them.
|
|
|
|
Post by camaro1967 on Feb 15, 2005 13:31:21 GMT -5
Thare are used set for sale alluminum thay claim thay flowe 348 700-255 700 ex 2.125 valve. Plan to use tham on 422 cu in 14.1 comp. Will GM bowe tie manifold bolt to this heads.
|
|
|
|
Post by john newman on Feb 16, 2005 8:33:35 GMT -5
only if its a raised runner manifold, the Edelbrock #2971 is a good intake to use,its a dominator flange,do you have a set for sale or you know of a set for sale,i'm looking for aluminum to swap my parts from my iron ones for the weight lose,i need standard exaust or are they spread port.
|
|
|
|
Post by camaro1967 on Feb 16, 2005 13:22:37 GMT -5
I just purchsad pair on a web 2-15-05 for $ 1650.00 .
|
|
|
|
Post by john newman on Feb 16, 2005 17:36:26 GMT -5
do you know if they have any more protopline heads for sale.i'm in need of a set of aluminums.
|
|
|
|
Post by prostock on Feb 17, 2005 19:14:06 GMT -5
This is only set thay had.
|
|
|
|
Post by prostock on Feb 17, 2005 19:57:39 GMT -5
I no somebody seling buick 10* degree valve angle titanium valves 2.200-1.630. The heads were comletely ported comes with jeseel shaft rockers 1.7-1.7 in ex.Sheet metal manifold top is 2-4500 $3.500.00 Or he got brand new cast manifold on 440 made 840 HP.3 used cams 2 set's of pistons avalible.Pistons 8- 4.125 8- 4.195.
|
|
|
|
Post by john newman on Feb 18, 2005 17:32:35 GMT -5
thank anyway, i have to keep the 23* heads for the class i run.sooner or later i will find a set or buy new All Pro's.thanks.
|
|
