|
|
Post by john newman on Nov 21, 2005 16:57:07 GMT -5
Mike, did you every port a set of the Sbc Edelbrock # 77559, 23* - R/R heads yet, I'm looking into a new 23* head for next year, going on a 440"Sbc. ( N/A )thanks.
|
|
|
|
Post by Mike Stark on Nov 22, 2005 7:20:36 GMT -5
I've done plenty of raised runners, but I don't remeber doing the Edelbrock. I'm sure it's pretty close to the rest. Should be a good 23 degree head for a big motor.
|
|
|
|
Post by john newman on Nov 24, 2005 16:52:42 GMT -5
So, is it possible to get the edelbrock's to flow in the upper 370's int., 270's ext., my protopline iron r/r flow 350 int , 260 ext. thanks mike for info.
|
|
|
|
Post by bluecamaro on Nov 25, 2005 11:39:42 GMT -5
John,
If you decide to use the Edelbrock RR heads, are you possibly going too sell the Protoplines ? I'm looking for a decent priced RR iron/aluminum head w/matching intake. Send me a e-mail with a phone number and pictures if you can, with some details on your heads/intake combo.
Thanks
Ron Miller rmiller249@comcast.net
Brownstown,Mi
734-782-9333 before 9:00 pm
P.S. I may have some info for you on the Bad-Mo-Fo RR heads that will flow around 380's on the intake !
|
|
|
|
Post by john newman on Nov 30, 2005 11:26:05 GMT -5
I'll have to see, what heads do you have that flow in the upper 370's, I'm looking for a 23* head only. Thanks.
|
|
|
|
Post by subhuman415 on Nov 30, 2005 14:53:26 GMT -5
[img src="[/img] ![]() "]  All Pro 23ยบ Flow Numbers INTAKE EXHAUST .200 153 123 .300 212 172 .400 272 210 .500 322 239 .600 358 251 .700 379 258 .800 382 261    |
|
|
|
Post by john newman on Nov 30, 2005 16:57:36 GMT -5
From Ron's Porting Service, i'd like to have a set of the Protopline 23* aluminum r/r heads (123-62-256) to save the weight.
|
|
|
|
Post by Ron Miller on Dec 1, 2005 10:38:36 GMT -5
John,
I do not have a set heads to trade !!!! I'm looking for a set of RR Iron/Aluminum heads. I look at this site often and was following your question about the Edelbrocks heads. Thats when I thought I would ask if your heads would be for sale and how much. Subhuman415 answered your question on one of the best flowing RR heads out their. That is the same head that I was going to suggest you buy bare and send them to Mike. The ProTopline RR aluminum head ""Is Not Available Yet"". They will not be available until mid to late next year in 06 thru RHS/Comp-Cams !! I do not have a weight issue and I can use the iron heads. Let me know how much you want for your heads. P.S. the ProTopline RR head part # is 223-62-256.
Talk or type to you later
Ron Miller
Brownstown,Mi
734-782-9333 before 9:00 pm
|
|
