|
|
Post by 406jeep on Oct 6, 2005 18:12:55 GMT -5
What heads would be the best for a 454 + .060. with a 2000 pound drag car with glide and brake? I want to go as fast as possible, but don't want to get heads too large for the motor! Will be a solid roller with 13.5 compression and good lower end.
|
|
|
|
Post by Maximum Race Engines on Oct 7, 2005 0:47:53 GMT -5
I will give my honest opinion. The Canfield 310's. I use these on alot of my big blocks due to low cost and for the money make excellent power. I sell these in package form as does Mike I am sure. No reason to go big and spend crazy money. They work. My 13.5 compression bracket engines that I sell use these and we make 750+ with a basic setup, with over 625 ft lbs with a real nice curve..not bad for a little .030" over 454. If you have any questions, feel free.
|
|
|
|
Post by Mike Stark on Oct 9, 2005 11:07:21 GMT -5
I've got as set of AFR 345's for sale now. With that low amount of weight dragging in the sand the big heads would make sick power. The 310's would be a great choice on a budget as well.
I'll make ya a pretty good deal on the AFR's depending how you wanted them.
|
|
