|
|
Post by Mike Stark on Aug 25, 2005 9:27:29 GMT -5
I've got a new aluminum head ready to go
Starts at 200 cc and flows 280 out of the box, the 210 cc version flows 300, fully ported it can go over 315.
The heads start at $599 bare, $950 complete for hyd. cam and so on. I'll post some pics up soon.
I also have a small block Ford head that is very similar in performance and cost.
|
|
|
|
Post by 77cruiser on Aug 26, 2005 11:59:55 GMT -5
Sounds interesting, base head would be perfect for a 400ci. street eng. IMO
|
|
|
|
Post by Chevelle Rob on Sept 12, 2005 20:28:56 GMT -5
Can you tell us more about this head ? Is it the "Avenger" head ? How about who is casting them ?
|
|
|
|
Post by Mike Stark on Sept 13, 2005 7:44:34 GMT -5
Same head as the Avenger head. It's cast in Australia. Very well done with top notch quality. Flow's more air than any other head it's size. I finish the heads in various forms to make my packages.
|
|
|
|
Post by Chevelle Rob on Sept 13, 2005 20:51:10 GMT -5
Cool, we have a set of those in the shop ( I port heads too) I won't be porting thease, but I will be throwing it on the bench to see whats what. Looks like a good head for the money.
|
|
|
|
Post by derrick on Oct 8, 2005 16:14:14 GMT -5
Have you used your new heads on a engine yet?
|
|
|
|
Post by Mike Stark on Oct 9, 2005 11:01:58 GMT -5
Yep got the Fords on a 408 and the Chevy's on a 383. Both make really good power.
I'll be running the NMCA Street Race class next year. I'm trying to get the heads approved for that class.
|
|
|
|
Post by sschevellefan on Feb 13, 2006 0:56:47 GMT -5
I realize this is a pretty old thread but how much extra to set them up for a solid FT cam? What combustion chamber CC`s are available?
|
|
|
|
Post by Mike Stark on Feb 13, 2006 19:52:24 GMT -5
Solid cams run $100 extra, but add 10* retainers. The chambers are 64cc.
|
|
|
|
Post by sschevellefan on Feb 13, 2006 21:24:03 GMT -5
Thanks Mike. If these heads were bought bare, would they need any other blending or port work? Thanks again.
|
|
|
|
Post by Mike Stark on Feb 16, 2006 20:33:36 GMT -5
Bare comes bare. No porting at all. They don't need anything to be run, but a little bowl blend wouldn't hurt. I can sell them bare with porting for a bit extra.
|
|
